T10 Mould Steel

T10 Mould Steel

T10 Mold steel is high-speed tool steel made of carbon and Tungsten. The T in its name stands for Tungsten, while the 10 stands for carbon content, which is 1.0%. T10 Carbon steel is Tungsten-based, and this is why it is categorized as high-speed steel.High-speed steels are very effective in making cutting tools because they exhibit excellent strength, heat resistance, and durability.Because of its tool steel properties, China T10 Mold steel is used to make swords, Katanas, drill bits, and power saws, among others.

Besondere Merkmale
  • Erstklassige Qualität
  • Sichere Zahlungen
  • Zufriedenheitsgarantie
  • Weltweiter Versand
  • Geld-zurück-Garantie

Chemical composition


Equivalent Grades of Steel









Mechanical properties

  • Tensile strength:1792 MPa
  • Tensile Strength, Yield:1482MPa
  • Elongation:8%
  • Modulus of elasticity: 207 GPa
  • Poisson’s ratio: 0.27-0.3


  • Samurai sword
  • Screw dies
  • Turning tools and plane cutter
  • Wire drawing dies
  • ForHand-saw bladesging die

Heat treatment conditions

  • FORGING: H11 hot work steels are forged at 1121°C (2050°F). For this type of steels, forging below 899°C (1650°F) is not preferable.
  • ANNEALING: H11 hot work steels are annealed at 871°C (1600°F) and slowly cooled at 4°C (40°F) in the furnace.
  • HARDENING: Preheat to 1500 F and then heat to 1850 F and hold for 15 to 40 minutes. Air cool (air quench).
  • TEMPERING: Tempering is carried out on H11 tool steels at temperature ranging from 538 to 649°C (1000 to 1200°F) to obtain Rockwell C hardness of 54 to 38. Double tempering can also be performed in these steels every one hour at the preferred tempering temperature
Cookie-Einstellungen aktualisieren